Olympus CV-180, Instructions Manual, Page: 179 / 296

Chapter 8 Installation and Connection
171
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
OEV143 or OEV203
For connecting the monitors (OEV143 or OEV203) to the video system center,
use the cables listed below.
For easy cable connection, attach the cable color sheet to the cables (see Figure
8.14).
• Connect the R/G/B/S connectors of the monitor cable to the
RGB component A terminals of the monitor. If those
connectors are connected to the RGB component B
terminals, remote control of the monitor is deactivated.
• When the monitor remote cable is connected to the monitor,
the “SPLIT“, “RESET“, “UNDERSCAN“, “OVERSCAN”
switches on the front panel of the monitor are deactivated.
Model (length) Product name
Use any one of the following cables.
MAJ-846 (7 m)
MAJ-921 (1.5 m)
MAJ-970 (4 m)
MAJ-971 (15 m)
MAJ-1462 (7 m)
MAJ-1584 (15 m)
MAJ-1586 (2 m)
Monitor cable
MAJ-227 (7 m) Monitor remote cable
Table 8.11