Olympus CV-180, Instructions Manual, Page: 197 / 296

Chapter 8 Installation and Connection
189
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
8.12 Connection to the AC mains power supply
• Be sure to connect the power plug of the power cord directly
to a grounded wall mains outlet. If the video system center is
not grounded properly, it can cause an electric shock and/or
fire.
• Do not connect the power plug to the 2-pole power circuit
with a 3-pole to 2-pole adapter. It can prevent proper
grounding and cause an electric shock.
• Always keep the power plug dry. A wet power plug may
cause electric shocks.
• Confirm that the hospital-grade wall mains outlet to which this
instrument is connected has adequate electrical capacity that
is larger than the total power consumption of all connected
equipment. If the capacity is insufficient, fire can result or
circuit breaker may trip and turn OFF this instrument and all
other equipment connected to the same power circuit.
• When using the mobile workstation (WM-NP1, WM-WP1),
confirm that the mobile workstation has adequate electrical
capacity that is larger than the total power consumption of all
connected equipment. If the capacity is insufficient, drop in
the supply voltage can result or the electric protective device
may trip and turn OFF all the equipment connected to the
mobile workstation.
• When non-medical ancillary electrical equipment is used,
always connect the equipment to a wall mains outlet via an
isolation transformer. Otherwise, electric shock can result.
• The total power consumption of all connected equipment to
the isolation transformer should not exceed the rating of the
isolation transformer. If it exceeds, add another isolation
transformer. Otherwise, the equipment may not work
correctly.
• Do not bend, pull or twist the power cord. Equipment damage
including separation of the power plug and disconnection of
the cord wire as well as fire or electric shock can result.
• Be sure to connect the power plug securely to prevent
erroneous unplugging during use. Otherwise, the equipment
will not function.