Olympus CFU-PWZ, User Manual

Page: 53 / 72

DMTA048-01EN, Rev. C, February 2013
Maintenance and Troubleshooting 49
Motor is running but
no water goes into
the inlet tube (cannot
prime) The inlet tube or the
outlet tube has a kink Remove the kink.
Water outlet holes
(for the scanner or
wedge) are
obstructed Remove dirt from the water outlet
holes.
Dirt on inlet filter Clean the inlet filter by following
the procedure in section 4.1
“Maintaining the Water Inlet
Tube’s Suction Filter” on page 43.
Bad inlet tube
connection Follow the connection procedure
in section 2.3.1 “Connecting the
Water Supply Tube” on page 29.
Inlet filter is above
the water line Fill up the water tank if it is
empty or sink the inlet filter to the
bottom of the tank.
Dirt on
INLET
connector
Remove dirt from the connector.
CFU03 or CFU05:
Valve on the pump
partially or fully
closed Turn the pump valve counter
clockwise to allow more water
flow.
CFU-PWZ: Valve on
the PipeWIZARD
partially or fully
closed Turn the PipeWIZARD valve
clockwise to allow more water
flow.
Table 4 Troubleshooting (continued)
Problem Description Possible Cause Solution
Downloaded from ManualsNet.com search engine