DMTA048-01EN, Rev. C, February 2013
Connections 33
2.4
Vacuum Suction System (CFU05)
This section will document the three connections that are specific to the CFU05 pump.
2.4.1
Air Supply
The water suction system on the CFU05 needs an adequate supply of compressed air
to generate the required vacuum. The vacuum suction’s air supply is connected to the
AIR
connector. This
AIR
supply connection uses a metallic quick-coupling mechanism
similar to the one used by the water supply
INLET
connection (see Figure 2-12 on
Figure 2-12 CFU05—Color-coded connections of the vacuum system
The air supply hose is not provided with the CFU05.
To connect the air-supply hose to the pump (CFU05)
1.
Select the air-supply hose with the metallic quick-coupling mechanism (this hose
is not part of the CFU05 package).
2.
Push the female metallic quick coupling in the plain male
AIR
connector until it
snaps into place; in this position, the connector is locked (see Figure 2-13 on
page 34).
Compressed-
AIR
connection
Color code: plain
V
ACUUM
OUTLET
to water tank or
drain
Color code: red
CFU05 unit
Downloaded from
Summary of Contents for CFU-PWZ
