DMTA048-01EN, Rev. C, February 2013
30 Chapter 2
Figure 2-8 Water supply
INLET
connection
To disconnect the water supply tube from the pump (CFU03, CFU05, and CFU-PWZ)
1.
Ensure that the pump is turned off.
2.
Pull back the blue ring of the coupling to release the tube’s male connector
(Figure 2-8 on page 30).
3.
Pull out the tube.
2.3.2
Connecting the Water Outlet Tube on CFU03 and CFU05
The water outlet tube connects to the CFU03/CFU05 pump’s water
OUTLET
connector.
This connection uses a plastic quick-coupling mechanism.
To connect the water outlet (CFU03 and CFU05)
1.
Ensure that the pump is turned off.
2.
Select the water tube that will feed the probe wedges.
3.
Insert the tube into the
OUTLET
connector (see Figure 2-9 on page 31).
4.
Push the tube into the receptacle to trigger the plastic quick-coupling mechanism.
Blue color-coded metallic
quick-coupling mechanism
Ring
CFU03 unit shown.
CFU05 and CFU-PWZ have
the same water
INLET
connection, at the same
location.
Downloaded from
Summary of Contents for CFU-PWZ
