29
GB
Making Basic Prints
Making Basic Prints
• If you press
(print)
button when the image
is displayed in full size,
only the displayed
image is printed. After
the printing finishes,
the image list appears.
• Normally, perform
printing with the image
list displayed.
• While printing, never
move or turn off the
printer. The ink ribbon
cartridge or the paper
may become stuck. If
this occurs, turn off the
printer, and turn it on
again and resume
printing from the
beginning.
• During printing, the
print paper is partially
ejected from the paper
outlet several times.
Never pull out the
paper by force.
• Avoid storing the paper
with the printed faces
contacting each other or
contacting with rubber
or plastic products
including vinyl
chloride or plasticizer
for an extended period
of time; the ink may
transfer on to them.
Selecting and printing multiple images at a time
Press the SELECT/CAPTURE button with the white
frame on the desired image in step 1; the red frame
appears inside the white frame showing that the image
selection is fixed.
The selection is fixed
(red frame inside).
To select multiple images, press the arrow (
“/”/$/4
)
buttons to move the white frame to the desired image
and press the SELECT/CAPTURE button. Repeat
these steps to frame the desired images in red.
Follow steps 2 and 3 of the “Printing” procedures
(pages 27 and 28) to print the selected images.
To cancel the selection, press the SELECT/CAPTURE
button again; the red frame disappears.
