21
GB
Setting Up
Setting Up
Eject lever
Repair with
transparent tape.
If the cartridge compartment lid does not close
Remove the ink ribbon cartridge, and then re-insert it.
To remove the used ink ribbon cartridge
If the
(paper/ribbon) indicator flashes slowly
(at intervals of about 0.5 second) after you press the
(print) button, the ink ribbon cartridge has run out.
Open the cartridge compartment lid and push up the
eject lever. Remove the used ink ribbon cartridge and
replace it with a new one.
(paper/
ribbon) indicator
While pressing the
center of the reel, wind
the ink ribbon in the
direction of the arrow.
Wind the ribbon
until the black line
comes to the left
edge.
To load the half-used ink ribbon cartridge
If ink ribbon should tear
Repair the ribbon with transparent tape. There should
be no problem with using the remaining portion of the
ribbon. Before loading the ink ribbon cartridge into the
printer, turn the reel until the transparent tape is
hidden.
Notes on storing the ink
ribbon cartridge
• Avoid placing the
cartridge in a location
subject to:
– high temperatures
– high humidity
– excessive dust
– direct sunlight
• When you are going to
store a partially-used
cartridge for an
extended period of
time, store it in its
original bag.
