Olympus C-3000 - 3.2MP Digital Camera Instructions Manual Download Page 163

Page: 163 / 236

163

Note:

• Formatting the card erases the existing data, including pictures which

have been write-protected from the camera. Be careful not to erase
important data when formatting a recorded card.

• Formatting will not be engaged when a write-protect adhesive seal is

placed on the card.

• Non-Olympus brand cards or cards formatted from or used in a computer

must be formatted by the camera. These cards may take longer to record
than recommended Olympus brand cards.

• It is highly recommended that you confirm the contents before formatting.

Summary of Contents for C-3000 - 3.2MP Digital Camera













































































































































































































































Search results

Summary of Contents for C-3000 - 3.2MP Digital Camera

Reviews:

Related manuals for C-3000 - 3.2MP Digital Camera

Brands by name

Popular brands

Olympus C-3000 - 3.2MP Digital Camera, Instructions Manual

Search results

Summary of Contents for C-3000 - 3.2MP Digital Camera

Reviews:

Related manuals for C-3000 - 3.2MP Digital Camera

Brands by name

Popular brands