Olympus C-3000 - 3.2MP Digital Camera Instructions Manual Download Page 211

Page: 211 / 236

211

1000

1001

1002

1003

Image shot with Bracketing
(5 frames)

Brightest

+ Com-
pensation

– Com-
pensation

Normal

Darkest

1239

1240

1241

Image shot with Bracketing
(1 frame discarded)

Images shot with bracketing are
displayed as shown on the left.

Image shot with normal images

1235

1237

Note:

• If Bracketing was used to take a picture, you must choose whether to

save or discard it before you can record another image.

• Also refer to Note on page 209.

To  display  an  image  shot  with
Bracketing,  select  the  image  and
press the OK button.
Press  the  OK  button  to  save  the
selected  image.  To  discard  the
image,  press  the  Erase  button  then
perform  step

on page 209. It will

disappear from the screen.

Save or delete all images in memory.

Summary of Contents for C-3000 - 3.2MP Digital Camera













































































































































































































































Search results

Summary of Contents for C-3000 - 3.2MP Digital Camera

Reviews:

Related manuals for C-3000 - 3.2MP Digital Camera

Brands by name

Popular brands

Olympus C-3000 - 3.2MP Digital Camera, Instructions Manual

Search results

Summary of Contents for C-3000 - 3.2MP Digital Camera

Reviews:

Related manuals for C-3000 - 3.2MP Digital Camera

Brands by name

Popular brands