Olympus C-3000 - 3.2MP Digital Camera Instructions Manual Download Page 161

Page: 161 / 236

Press the OK button with YES
selected to erase all the
pictures in the card.

• To cancel, select NO using the

right arrow on the jog dial.

When complete, NO PICTURE
appears on the LCD monitor.

• Protected frames will remain in

the card, and the last frame will
be displayed. (p. 112)

161

Caution:

• Be careful not to erase important picture data by mistake as it cannot

be retrieved.

• Never open the card cover, eject the card, remove the batteries, or pull

the plug while erasing pictures. It may destroy the data in the card.

• When a write-protect adhesive seal is placed on the card, the camera

does not enter the Erase mode.

Summary of Contents for C-3000 - 3.2MP Digital Camera













































































































































































































































Search results

Summary of Contents for C-3000 - 3.2MP Digital Camera

Reviews:

Related manuals for C-3000 - 3.2MP Digital Camera

Brands by name

Popular brands

Olympus C-3000 - 3.2MP Digital Camera, Instructions Manual

Search results

Summary of Contents for C-3000 - 3.2MP Digital Camera

Reviews:

Related manuals for C-3000 - 3.2MP Digital Camera

Brands by name

Popular brands