Olympus C-3000 - 3.2MP Digital Camera Instructions Manual Download Page 131

Page: 131 / 236

If your main subject is not within the autofocus marks, follow the
procedure below to obtain focus. This is called focus lock.

Position  your  subject  within
the  autofocus  marks,  and
press  the  Shutter  release
button halfway.

• The Green lamp next to the

viewfinder lights.

Recompose the picture while
keeping the Shutter release
button pressed halfway.

Press the Shutter release
button fully to start recording.

131

FOCUS LOCK

Autofocus mark

Viewfinder

Note:

• The autofocus mark does not appear on the LCD monitor. Confirm that

the subject is centered and in focus before taking the picture.

• If the Green lamp blinks, the focus or exposure is not locked.

Summary of Contents for C-3000 - 3.2MP Digital Camera













































































































































































































































Search results

Summary of Contents for C-3000 - 3.2MP Digital Camera

Reviews:

Related manuals for C-3000 - 3.2MP Digital Camera

Brands by name

Popular brands

Olympus C-3000 - 3.2MP Digital Camera, Instructions Manual

Search results

Summary of Contents for C-3000 - 3.2MP Digital Camera

Reviews:

Related manuals for C-3000 - 3.2MP Digital Camera

Brands by name

Popular brands