Olympus C-2000 - Zoom 2.1MP Digital Camera, Instruction

Page: 228 / 248

E
228
The pictures already taken do not appear on the LCD
monitor.
1 The camera is in the Record mode.
[
Set the Mode dial to “ ”. (P. 142)
2 There is no picture in the card.
[ NO PICTURE appears on the LCD monitor. (P. 142)
3 There is a problem with the card.
[ See the Error code chart. (P. 72)
The LCD monitor is hard to read.
1 The brightness may be incorrectly set.
[ Adjust the brightness. (P. 180)
When the camera is connected to a computer, an error
message appears while data is being transferred to the
computer.
1 The cable is not plugged in correctly.
[ Connect the cable correctly. (P. 214)
2
The power is OFF.
[ Turn on the camera and set the Mode dial to “ ”.
(P. 216)
3 The batteries are exhausted.
[ Replace the batteries with new ones (P. 54) or use the
optional AC adapter (P. 56).
4 The serial port is not selected correctly.
[
Use the operating system software to make sure the
serial port is selected correctly.
5 There is no available serial port.
[ Make one available by following the computer’s
instructions.