manualshive.com logo in svg

Olympus BX63, Instructions Manual

Share
Download
Olympus BX63 Instructions Manual Download Page 7

3

BX63

Safety Symbols

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment 
in the safest possible manner.

Symbol

Explanation

Indicates that the surface becomes hot, and should not be touched with bare hands.

Indicates a non-specific general hazard. Follow the description given after this symbol or in 
instruction manual.

Indicates that care is required against your finger or hand being caught.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Caution indications

  Caution labels are placed at parts where special precaution is required when handling and using the microscope. Always 

heed the cautions.

Caution label 

positions

Lamp housing 

[Caution against high temperature]

Revolving nosepiece arm 

[Caution against finger or hand being caught]

  If a caution label is dirty or peeled off, contact Olympus for the replacement or other inquiry.

Summary of Contents for BX63

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands