25
BX51WI
Objective
· MPLN5X
· UMPlanFLN10XW/20XW
· LUMPlanFLN40XW/60XW
· LUMFLN60XW
· LUMPlanFl100XW
· XLUMPlanFl20XW
3. To enable IR observation, the following modules should be replaced with those based on the IR specifications.
TV adapter
(Note)
Trinocular tune
U-TR30IR
U-ETR3
U-TR30-2
Polarizer
32POIR
IR filter
32BP775 or 32IR900
Lamp housing
U-LH100IR
Thermal reflection filter
45SCF
Analyzer
WI-ANIR or
WI-ANTIR (+ U-KPA)
IR TV camera
Video contrast device such as
the ARGUS10, 20 by Hamamatsu
Photonics, monochrome video
monitor
Usable with IR900nm.
(Note) Notes for combination of the TV adapter, intermediate attachment and observation tube
When an observation tube other than the U-TR30IR is used, select the TV adapter by referring to combinations a) to c)
below.
# With IR observation, the combination with the U-PMTVC or U-DPT cannot manifest full performance.
a) Combination for observing a wide field (direct image 1X)
Direct image adapter
U-TV1X
Mount adapter
One of 3 models
*
TV camera
(IR specification model)
*
The mount adapter should be one of: 1) U-CMAD3 mount adapter; 2) U-BMAD bayonet mount adapter; 3) U-SMAD Sony
camera mount adapter.
Note) When the contrast is enhanced rather excessively by an image processor, the central area of the monitored image
may be made bright and noticeable.
b) Combination using C-mount adapter IR system (visible light to 1000 nm)
C-mount adapter IR system
U-TVCAC
U-PMTVC2XIR
U-PMTVC4XIR
C-mount TV camera
(IR specification model)
c) Combination using U-CA or U-ECA intermediate tube
One of these intermediate tubes can be used only in combination with the U-ETR3 or U-TR30IR trinocular tube. The TV
adapter used in this combination should be one of that used in a) or b).
