Olympus 225625 - Stylus 800 Digital Camera Advanced Manual Download Page 143

Page: 143 / 166

Safety Precautions

143

Appendix

• Radio and Television Interference

Changes or modifications not expressly approved by the manufacturer may

void the user’s authority to operate this equipment. This equipment has been

tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:
- Adjust or relocate the receiving antenna.
- Increase the distance between the camera and receiver.
- Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

- Consult your dealer or an experienced radio/TV technician for help. Only

the OLYMPUS-supplied USB cable should be used to connect the camera

to USB enabled personal computers (PC).

Any unauthorized changes or modifications to this equipment would void the

user’s authority to operate.

FCC Notice

Summary of Contents for 225625 - Stylus 800 Digital Camera







































































































































































Search results

Summary of Contents for 225625 - Stylus 800 Digital Camera

Reviews:

Related manuals for 225625 - Stylus 800 Digital Camera

Brands by name

Popular brands

Olympus 225625 - Stylus 800 Digital Camera, Advanced Manual

Search results

Summary of Contents for 225625 - Stylus 800 Digital Camera

Reviews:

Related manuals for 225625 - Stylus 800 Digital Camera

Brands by name

Popular brands