Changing the startup screen and volume (PW ON SETUP)
87
6
Setti
ng
s
1
For [SCREEN], select [OFF], [1],
[2], or [3], and press
Z
.
OFF
No picture is displayed.
1 / 2
A picture is displayed.
3
The picture registered with
[SCREEN SETUP] is
displayed. If there is no
registered picture, nothing is
displayed.
2
For [VOLUME], select [OFF],
[LOW], or [HIGH], and press
Z
.
OFF
No sound.
LOW / HIGH
Sound is output.
3
Press
Z
.
You can select the picture that is displayed when the power is turned on. Still pictures
in the internal memory or the card can be registered. Use [PW ON SETUP] to display
the screen you registered.
g
“Changing the startup screen and volume (PW ON
SETUP)” (P. 86)
Top menu
[MODE MENU]
[SETUP]
[SCREEN SETUP]
g
“Using the menus” (P. 16)
• If a picture is already registered, the [IMAGE
EXISTING] screen is displayed asking if you
want to cancel the currently registered picture
and register a new one. To register a new
picture, select [RESET], and press
Z
. If you
select [KEEP], the screen returns to the menu.
Note
• If [SCREEN] is set to [OFF], [VOLUME] cannot be set.
Registering the startup screen (SCREEN SETUP)
OK
GO
PW ON SETUP
VOLUME
SCREEN
SELECT
1
2
OFF
3
OK
LOW
HIGH
OFF
GO
PW ON SETUP
VOLUME
SCREEN
SELECT
RESET
KEEP
IMAGE EXISTING
SCREEN SETUP
SELECT
CANCEL
OK
GO
