Cautions
• Never attempt to insert
or remove the
SmartMedia or
CompactFlash card while
the ACCESS/CHARGE
indicator on the
operation panel is
blinking. Otherwise, the
card's formatting may be
destroyed, making it
unusable.
• Do not insert or remove
the SmartMedia or
CompactFlash card
during printing.
Otherwise, normal
printing may be
impossible, or the card's
formatting may be
destroyed, making it
unusable.
• Never open the cartridge
compartment lid during
printing. This can make it
impossible to remove the
ink ribbon cartridge or
cause a paper jam.
Should you open the
cartridge compartment
lid by mistake, see page
43.
• Never remove the paper
feed cassette during
printing. This can make it
impossible to remove the
ink ribbon cartridge or
cause a paper jam.
Should you remove the
paper feed cassette by
mistake, see page 43.
• Never move the printer
during printing. This can
make it impossible to
remove the ink ribbon
cartridge or cause a
paper jam.
Press the PRINT button.
A short beep is generated, the ACCESS/CHARGE
indicator blinks to indicate that the data is being
loaded, and the PRINTING indicator lights when
printing starts.
If print paper runs out during printing:
The printer beeps repeatedly, and the PAPER/
RIBBON alarm indicator on the top panel blinks
rapidly (at intervals of about 0.25 second). Load
print paper in the paper feed cassette. The
remaining image copies will be printed
automatically. Usually, the ink ribbon cartridge runs
out at the same time as the print paper. When this
occurs, replace the ink ribbon cartridge before
adding print paper.
If the ink ribbon cartridge runs out during printing:
The printer beeps repeatedly, and the PAPER/
RIBBON alarm indicator on the top panel blinks
slowly (at intervals of about 0.5 second). Wait until
the print paper comes out and then replace the ink
ribbon cartridge with a new one. The remaining
image copies will be printed automatically when the
cartridge compartment lid is closed.
Basic Printing
3
29
