Page
3
from
4
Alternative mounting method
Wall mounting
3.
Pass the cable thru the nut and the
extension pipe and tighten it
6.
Hang the luminaire and adjust the
metall cover by the screw of the
metall ring
2.
Tighten the screw
1.
Place the plastic part
4.
Pass the cable thru the knock out
and connect the wires to the terminal block
5.
Place the plastic cover
ATTENTION
!!!
All metall parts must be connected to ground
A limited number of extensions can be used in order to
maintain the stability of the luminaire
2.
the screw
Tighten
1.
Place the plastic part
3.
Pass the cable thru the knock out
and connect the wires to the terminal block
4.
Place the mounting accessories in the wall
and tighten the mounting screw
5.
Place the plastic cover
Wall in bottom view
Hanging installation
using the special
mounting sets
Flag mounted installation on
a wall using the special
mounting bracket
contained in the package.
2.
Tighten the screw
4.
Place the mounting accessories in the wall
and screw the mounting screws
3.
Connect the wires to the terminal block and pass
the cable thru the knock out
1.
Place the single mounting plastic part
Wall mounted installation
using the special mounting
brackets contained in the
package.
Extension ability
In recess mounting in suspended ceiling or in external ceiling
mounting
,
we can use the
Α-1022
extension set
(20
cm
),
the
Α-1025
extension set
(40
cm
),
and the
Α-1026
(60
cm
)
extension set
after
request
.
A-1026
A-1022
A-1025
TYPE
DESCRIPTION
Extension set 2
0
cm
.
Extension set 4
0
cm
.
Extension set 60 cm.
922504450_09_018
