Page 2 from
4
steadily.
When the
TEST button
is released
, the
Blink
(
With
AC Charge LED
ON): Autonomy or
l
uminaire
will change between
maintained or no-
low battery problem
maintained
mode.
The change is recorded
(the battery must be replaced).
permanently in it’s memory.
Blink
(
With
AC Charge LED
Off):
Indication LED status (with connected mains
No charging current or disconnected battery
.
power supply).
AC
Charge
On:
Good charge current.
Οff:
No battery
(
No charging current or
disconnected battery
).
Lamp fault
Οn:
faulty LED strip (must be
checked by an authorized personel).
Off:
Good LED strip.
Fault
Ο
ff
:
Battery OK.
Ceiling mounting
Mounting methods
Recessed mounted installation
on suspended ceilings using
the base type
Α-1018,
Α-1020, Α-1021
Electric connection and dimensions (in mm)
ZLD-28 : 290(
α
) x 95(
β
)
ZLD-34 : 350(
α
) x 165(
β
)
ZLD-44 : 450(
α
) x 215(
β
)
Suspended ceiling
mounting bases
β
60mm
α
Hanging installation on
suspended ceilings using the special
mounting brackets contained
in the package.
2.
Tighten the screw
1.
Place the plastic part
3.
Pass the cable thru the knock out
and connect the wires to the terminal block
4.
Place the mounting accessories on the wall
and tighten the mounting screw
5.
Place the plastic cover
TEST
BUTTON
CHARGE
LED
FAULT
LED
LAMP
FAULT
LED
INDICATION LEDs
L N
220-240V
AC/50-60Hz
A-1018
280
A-1020
342
75
Ø6
75
A-1021
440
75
Ø6
Ø6
922504450_09_018
