Configuration
OPERATING
INSTRUCTIONS
www.olympia-vertrieb.de
20
Page
Configuration
Various additional functions can be adjusted according to individual
requirements:
The same basic procedure is always used to navigate through the menus:
S
Turn the rotating [SCROLL] knob and to select a menu option.
S
Confirm the selection by pressing the [SELECT] button.
S
If necessary, make other selections in a submenu.
S
Confirm the selection by pressing the [SELECT] button.
Note:
Press the [BACK] button to move one level back in the sequence of
menus.
Network Settings
This menu is used
S
to start a new scan for networks to establish a connection to
another network.
S
to set network parameters manually.
Version
This menu is used
S
to display the versions of the software and hardware in the radio
equipment.
Firmware Update
This menu is used
S
to download a new firmware for the radio via the Reciva internet
portal.
Note:
Under certain circumstances, it is possible that operating sequences
described in this instruction manual are modified following a firmware
update.
When a new firmware is available, it is indicated in the radio display. You
can decide for yourself whether to download the firmware.
If you start downloading and want to cancel it, press the [BACK] button.
Note:
A firmware update may take several minutes. Do not switch the radio
off during the update procedure! This could lead to irreparable damage to
the radio equipment.
Factory Settings
This menu is used
S
to return the radio equipment to its default settings set at the
factory.
Note:
If you reset the default factory settings, all the adjusted settings and
connection parameters are erased.
Registering
This menu is used
S
to display a code (key).
This code (key) is required when you want to register the radio
on the Reciva customer portal (http://www.reciva.com/).
