Olympia WEBRADIO 100, Operating Instructions Manual

Page: 12 / 32

Network
www.olympia-vertrieb.de
8 Page
OPERATING
INSTRUCTIONS
Network
Integrating the Receiver in a Wi
− Fi/WLAN Network
The radio receiver must be integrated in a network with Internet access:
1. Press the [STANDBY/ON] button.
2. The display changes after approx.
2 seconds.
3. The display changes again after approx.
1 second.
4. Press the [SELECT] button.
5. The equipment automatically scans for
Wi − Fi/WLAN networks.
6. The Wi − Fi/WLAN network access points
which can be accessed are displayed with
your SSID. If several networks are found,
select the network required by pressing
the [>>] /
[>>]
buttons.
7. Confirm the selection by pressing the
[SELECT] button.
Note: SSID − Service Set Identifier. This is the network name entered by the
network provider to identify the network.
Note: This message appears when no
Wi − Fi/WLAN network access points are
found. Check the network settings.
Information on this is available in the
instruction manuals supplied with the
corresponding devices.
8. If the network selected is not encrypted,
the connection is automatically
established.
9. If the network selected is encrypted, you
are prompted to enter the corresponding
code (key).
10.The device automatically switches to input
mode after approx. 3 seconds.
11.Enter the code completely and correctly.
12.Press the [>>] /
[>>]
buttons to select the
END menu option.
13.Confirm the selection by pressing the
[SELECT] button.
Reciva Radio
ARM Powered
Initialising
network
< Scan for networks >
Enter network
Scanning
Olympia network
No networks
found
Connecting to
network
Load list of
radio stations
Enter WPA key
Enter WEP key