![background image](http://html1.mh-extra.com/html/olympia/vario-duplex-4000/vario-duplex-4000_manual_732527017.webp)
17
Trimmer
Trimmer with integrated cut selector switch and setting lock.
Cutting functions:
1. Straight cut
Cutting capacity: max. 3 sheets (80g/m²)
2.
Perforation
Cutting
capacity: max. 3 sheets (80g/m²)
3. Wave cut
Cutting capacity: max. 3 sheets (80g/m²)
The blades are accommodated in a protected housing.
A spare blade is contained in the integrated storage compartment.
1
Place the cutting unit on a stable, level base with the trimmer side fac-
ing up.
2
Slide the cutting head to one side of the guide rail.
3
Place the material to be cut in the required position under the trans-
parent pressing rail and hold the material in place with one hand when
cutting.
Note:
Hold the material to be cut securely, otherwise it could shift and
be cut inaccurately. The raster and measuring system on the trim-
mer's working surface serve as positioning aids.
4
To complete the cut, press the cutting head down and slide it along
the guide rail to the other side.
Note:
To prevent a faulty cutting edge, do not run the cutting head
back again but remove the cut material directly after completing the
cut.
Fig.
4
Summary of Contents for Vario duplex 4000
Page 2: ...2 ...
Page 33: ...33 Figura 1 Figura 2 Figura 3 ...