20
Replacing the Cutting Head
When the blade of the cutting head is damaged or worn, the cutting head
must be replaced.
1
Remove the end cap of the guide rail from the base plate (Fig. 8, A)
by pulling it upwards.
2
Pull the guide rail out of the base plate (Fig. 8, B).
3
Remove the cutting head from the guide rail (Fig. 8, C).
4
Replace the old cutting head with a new one.
Fig.
8
5
Slide the guide rail back in the base plate and install the new cutting
head in the process.
6
Insert the end cap from above on the opening at the end of the guide
rail.
Note:
Only the entire cutting head can be replaced. To obtain a new
cutting head, please telephone our hotline.
Summary of Contents for Vario duplex 4000
Page 2: ...2 ...
Page 33: ...33 Figura 1 Figura 2 Figura 3 ...
