![background image](http://html1.mh-extra.com/html/olympia/vario-duplex-4000/vario-duplex-4000_manual_732527016.webp)
16
Features
For cutting photos, card, printouts or laminated paper perfectly to size.
•
Guil pressing rail with finger protection
•
Trimmer with 3 types of cut
(straight cut, perforation and wave cut)
•
Visual positioning aids in cm (lines, angles, scale)
•
Rubber footpads for secure, non-slip base
•
Dimensions: 405x195x50 mm (LxWxH)
•
Weight: 1.1 kg
•
Cutting length: 270 mm
Guillotine
Cutting capacity: Max. 5 sheets (80g/m²)
Pressing rail with finger protection
Cutting blade made of stainless steel
1
Place the cutting unit on a stable, level base with the guillotine side
facing up.
2
The guillotine arm is locked at the bottom edge of the cutting unit. To
unlock the guillotine arm, pull the locking latch out a little (Fig. 1, A)
and slide it towards the front to Position B (Fig. 1).
3
Move the guillotine arm upwards.
4
Place the material to be cut in the required position under the pressing
rail and press the pressing rail down (Fig. 2).
5
Then use your other hand to move the guillotine arm down and cut the
document (Fig. 2).
6
In order to lock the guillotine arm again after finishing your work, move
the guillotine arm down as far as possible, pull the locking latch at Po-
sition B out a little and slide it back to Position A (Fig. 3).
Fig. 1
Fig. 2
Fig. 3
Summary of Contents for Vario duplex 4000
Page 2: ...2 ...
Page 33: ...33 Figura 1 Figura 2 Figura 3 ...