2-7
IPP printing
1
Connect the network cable. (Refer to “Connecting to a local area network
(LAN)” on page 1-12.)
2
From the machine’s control panel, specify the IP address, subnet mask and de-
fault gateway. (Refer to “Specifying an IP address” on page 2-9.)
3
Print the settings information, and then check the settings. (Refer to “Printing
the settings information” on page 2-13.)
– If optional fax kit FAX-4000 and image controller PCL-4000 are not in-
stalled, the settings information cannot be printed from the machine’s con-
trol panel.
4
Install the printer driver. Specify the network port when the driver is installed.
– If the GDI driver is to be installed, refer to the User’s Guide for the GDI
printer controller, included with this machine. If the PCL driver (optional)
is to be installed, refer to the User’s Guide for image controller PCL-4000,
included with the PCL-4000 option. For details on specifying the network
port, refer to “Connecting the computer and this machine over a network”
on page 2-15.
Summary of Contents for Omega 2140
