manualshive.com logo in svg

Olympia Omega 2140, User Manual

Share
Download
Olympia Omega 2140 User Manual Download Page 131

5-24

4

Press the one-touch dial key programmed with the group to be edited or delet-
ed.
After the registered information is displayed, the following screen appears.

– If a one-touch dial destination or program is registered with the selected 

one-touch dial key, the message “NOT ACCEPTED” appears, and then the 
“DIAL REGISTRATION” menu appears.

5

Press the [

,

] or [

+

] key until “EDIT” or “DELETE” is selected.

– If “DELETE” was selected and the [OK] key is pressed, the message “DE-

LETED” appears, and then the “DIAL REGISTRATION” menu appears 
again.

6

To edit the information, select “EDIT”, and then press the [OK] key.
The name of the registered destination is displayed.

– To correct destination name, press the [Clear/Stop] to erase it, and then 

type in the correct destination name.

The name of the registered destination is displayed.

7

Press the [OK] key.
The following screen appears.

Summary of Contents for Omega 2140






















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands