COMPLIANCE INFORMATON
FEDERAL COMMUNICATIONS COMMISSION REQUIREMENTS
The equipment complies with Part 68 of FCC Rules and Technical
Requirements for Telephone Terminal Equipment published by ACTA. The
marking on the base unit of this equipment contains, among other
information, the US Number and Ringer Equivalence Number (REN) for this
equipment. You must, upon request, provide this information to your
telephone company.
The REN is also useful in determining the quantity of devices that you may
connect to your telephone line and still allow these devices to ring when
your telephone number is called. In most areas, but not all, the sum of the
RENs for all devices connected to one line should not exceed five (5.0). To
be certain of the number of devices that you may connect to your line, you
should contact your local telephone company.
If your equipment should cause harm to the telephone network, the
telephone company may temporarily disconnect your service. If possible,
they will notify you in advance that temporary discontinuance of service
may be required. However, when advance written notice is not possible,
the telephone company may temporarily disconnect service without notice
if such action is necessary under the circumstances. The telephone
company may make changes in its communication facilities, equipment,
operations, or procedures where such action is reasonably required in the
operation of its business and is not inconsistent with the rules and
regulations of the Federal Communication Commission.
Notice
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See installation
instructions for details.
DEFAULT VALUE
Items
Factory Default
Speaker Volume on Portable Part
Medium
Ringer Volume
Volume 3
Ringer Melody
Melody 1
Dialing Mode
Tone
Flash Duration
Duration 1
Redial Record
Empty
Phonebook Records
Empty
User Phone Number Record
Empty
Network Service Number Record
Factory Default
Service Center Number Record
Factory Default
TROUBLE SHOOTING
Cannot make a call…
1. Check that the microphone is ON during the call. The GREEN
microphone indicators should be lit.
2. Check that the telephone line is connected between the socket on the
bottom of the base unit and to the wall phone socket.
3. Check that the main adapter is connected to the base and POD units.
Sound quality is poor…
1. Keep noise equipment (e.g. a fan or computer) away from the base and
POD units to avoid excessive noise.
2. Terminate the call and call the other party again to see whether another
line provides a better conversation.
3. Speak closer to the POD for a better reception.
If you need any help, please call help line 1-866-537-0384.
Or, contact service center: Wave Industries Ltd.
nd
333 SE 2 Avenue, Portland, OR 97214
USA
www.olympiaphones.com
TECHNICAL DATA
Audio Bandwidth
200 to 3800 Hz
Speaker Volume
90 dBspl A weighted
Power Supply
120 VAC, 7 VDC 400 mA (for Base)
120 VAC, 12 VDC 500 mA (for POD)
Battery pack of 6xAA size 1800 mAh (POD only)
Certification
UL, FCC
31
32