Additional Features
Call Recording
External recording equipment can be
connected to the 2.5 mm mono jack on
the base unit for call recording
Out of Range
During phone mode, the LED's on the
POD flashes RED quickly and the signal
icon flashes when it is too far from the
base.
User should move closer to the base so
the call will not be terminated.
When the POD is moved close enough
to the base, the LED's and the signal
icon will stop flashing automatically.
Paging
Press the
PAGE
button at the base
during Standby to locate the POD.
The POD will ring until any key is
pressed or stop after 30 seconds if no
keys are pressed.
Low Battery
During standby, the battery icon will
become empty and starts flashing when
the battery is low.
During phone mode, the LED's on the
POD flashes RED quickly every minute
and the empty battery icon flashes when
the battery is low.
5
5
5
5
5
5
5
5
Programming
Service Center Number
Press
“6”
to select service center
number programming.
(The LCD displays the current number if
it has been programmed; otherwise, a
blank screen shall be displayed)
Press
PROGRAM
key to select service
center number programming.
(The current number flashes.)
Press
CLEAR
key to erase the digit of
the current number one by one. Press
and hold
CLEAR
key to erase the entire
number.
Enter new numbers.
Press
PROGRAM
key to confirm the
editing and press
CLEAR
key to exit.
Default Setting
Press and hold
“9”
to return the phone
to default setting.
(The display will show
“888888888888888888”.)
Press
PROGRAM
key to confirm the
selection and press
CLEAR
key to exit.
5
5
5
5
5
5
5
27
28