Programming
You can program the ringer melody, dialing mode, flash duration, user
phone number, network service number, and service center number. You
can also put all the settings back to the factory defaults.
Start Programming
5
Press and hold
PROGRAM
key during
Standby.
( icon is on.)
5
At any time, press and hold
CLEAR
key
to return to Standby.
Ringer Melody
Press
“1”
to select ringer melody
programming.
(The current melody number shall be
displayed.)
Press
PROGRAM
key to select melody
programming.
(The current melody number flashes.)
Press
“1” to “5”
keys to select melody 1
to melody 5 respectively.
(The selected melody shall be played
once.)
Press
PROGRAM
key to confirm the
selection and press
CLEAR
key to exit.
5
5
5
5
Note:
1. In the programming selection, pressing and holding
CLEAR
key
shall abort all the changes and return to Standby.
2. Invalid entry during programming shall be ignored with a reject tone.
3. If there is an incoming call or paging from the base, the
programming will be aborted.
Add New Number in Phonebook
You can store up to 10 phone numbers in phonebook. Each phone
number can hold up to 44 digits. The original phone number, if any, shall
be overwritten when a new number is stored in the same phonebook
location.
Enter the new phone number during
Standby.
(Press and “#” shall display “ ”
and “ ” respectively.)
Press and hold
PHONEBOOK
key.
and icons are displayed.
Press
“0” - “9”
to select the phonebook
location.
Press
PHONEBOOK
again to confirm
and a confirmation tone will be heard.
The LCD shall return to Standby.
5
5
5
5
5
5
Note:
1. If the phone number contains more than 18 digits, only the last 18
digits shall be displayed. The scroll icon shall turn on.
2. If the phone number reaches 44 digits, further attempts of digits
shall be rejected by a reject tone.
3. If no digit is entered after selecting the phonebook location, no
phonebook number can be added in that location.
4. Press
CLEAR
key at any time can stop the phonebook entry and
return to Standby.
23
24