background image

Making Calls

You can make a call by 

pressing PHONE key and then dialing phone number;
dialing phone number and then pressing PHONE key; 
redialing the last number you dialed;
dialing the number in phone book.

Traditional Dialing
The phone line is seized before the phone number is entered.  The phone 
number cannot be edited or verified before dialing.

Press 

PHONE

 key.  

(The Phone icon turns on and your 
phone number turns off.)

Dial the number. Digits are displayed.  

(Pressing     and # shall display “    ” 
and “    ” respectively.)  

Call timer and talk time remaining 
counter icons are displayed a while after 
the last key press.

To end the call, press 

PHONE

 key.

5
5
5
5

5

5

5

5

Making Calls

Predialing

The phone number is entered before the phone line is seized.  The phone 

number can be verified before you place the call.

Enter the phone number.  Digits are 

displayed.

Press 

CLEAR

 key to clear previous digit 

during number entry.

Or, press and hold 

CLEAR

 key to delete 

the entire string

(Pressing      and # shall display “    ” and 

“    ”

 

respectively.  A pause “P” is 

displayed by pressing and holding “#”.)

Press 

PHONE

 key to dial the number .

     

 

icon turns on.

Call timer and talk time remaining 

counter are on.

To end the call, press 

PHONE

 key.

5

5

5

5
5

5

5

Note: 

If more than 18 digits are dialed, only the last 18 digits shall be 
displayed.  The Scroll icon shall turn on. No limit on the number of 
digits being dialed out.

Note: 

If more than 18 digits are dialed, only the last 18 digits shall be 
displayed.  The Scroll icon shall turn on.  You can enter up to 44 digits 
otherwise a reject tone will abort the digit entry. 

11

12

Summary of Contents for OL6010





















Reviews: