![background image](http://html.mh-extra.com/html/olympia/ol2410/ol2410_owners-manual_732395061.webp)
OLYMPIA OL2410 Owner's Manual
61
9.4.3 Memory full/ Answer only/ Answer off
1) If select answer only mode, send an incoming ring to the unit. DAM will
answer after 2 or 4 rings, and play the announcement 2, and then go to standby
state. If do not record the announcement 2, it will use the default announcement 2.
2) If select answer off mode, send an incoming ring to the unit. DAM will
answer after 10 rings then a 3-second beep can be heard.
3)
If the memory is full, send an incoming ring to the unit. DAM will answer
after 10 rings then a 3-second beep can be heard.
4)
If no valid code input within 15 seconds, a beep is heard and line disconnect,
it go to standby state, no message recorded.
9.5 Volume Control
9.5.1 In Standby Mode
1) Press
UP/Down
key to enter volume setting, the current volume level number
will display on the 7-segments LED.
2)
Press
Up/Down
key to increase/ decrease the volume level, the 7-segments
LED displays the volume number ( 1 - 8 ).
9.5.2 During message playback
1) Press
UP/Down
key to enter volume setting, the current volume level number
will display on the 7-segments LED.
2)
Press
Up/Down
key to increase/ decrease the volume level, the 7-segments
LED displays the volume number ( 1 - 8 ).
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com