![background image](http://html.mh-extra.com/html/olympia/ol2410/ol2410_owners-manual_732395057.webp)
OLYMPIA OL2410 Owner's Manual
57
2)
Then press the
mailbox ‘1or 2 or 3’
button that you want to delete, the unit
will announce “all old messages are deleted”, and the DAM will return to
standby mode.
or
or
3)
The 7-segment LED message counter will return to “0” if no new message in
any mailbox.
4)
The mailbox LED will be turned off if no new message in that mailbox.
5)
All messages should be listened before. Only the messages that were
listened can be deleted.
6)
You must notice only the messages you have reviewed can be deleted and
once you deleted the message, it cannot be recovered.
9.3 About announcement (OGM)
1) You can record up to two different announcements— one for normal answering
and the other is for announcement only.
2)
Use normal answering when you want the DAM to record callers’ messages.
Uses announce only when you want to give information to callers without
accepting messages.
3)
If you choose not to record an announcement, the DAM answers with a pre-
recorded announcement.
4)
The normal answering pre-recorded announcement says “
Please leave your
message after the beep
”
5)
The announce only pre-recorded OGM is “
I am sorry I am not available.
Please call back later
”
6)
By setting announce only On or Off, you decide which announcement your
callers will hear when the DAM answers a call (the DAM comes set for normal
answering, with announce only turned off).
7)
Pre-record OGM cannot be deleted. When user-recorded announcement is
deleted, the pre-recorded OGM is used.
8)
During announcement recording, all of the other buttons are disabled except
“Stop” button. If send an incoming call to the unit, the recording will be
cancelled automatically, and start to ring.
9)
During announcement recording, if press handset “Talk” button to take the line,
the recording will be cancelled automatically.
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com