![background image](http://html.mh-extra.com/html/olympia/ol2410/ol2410_owners-manual_732395055.webp)
OLYMPIA OL2410 Owner's Manual
55
4)
If the recorded time exceeded 1 minute, the recording will be stopped
automatically with the announcement “recorded”
5)
If the recorded time is less than 3 seconds, DAM will announce “ Message was
not recorded. Please record longer message again”, and then return to standby
mode.
6)
If memory becomes full while recording, three beeps are heard and DAM will
announce “Memory is full”, at the same time the 7-segments LED will display
“F” and the message count alternatively (250ms per display)
7)
During MEMO recording, send an incoming call to the unit. The recording
will be cancelled automatically, and the unit starts to ring.
9.2.2 Messages playback
The DAM automatically saves your messages until you delete them. In addition,
you can store approximately 15 minutes of messages, memos, and announcements
(up to a maximum of 50 messages).
l
Play
1)
Press
a Mailbox
key at idle.
or
or
2)
When there are new messages in a mailbox and no old message, the LED of
mailboxes will be flashing. Press the mailbox button at idle mode,the unit will
announce “mailbox *, you have ** new messages” and start playing from the
first new message and continuing until the last one.
3)
When there are new messages and old messages, the LED of mailboxes will
be flashing. Press the mailbox button at idle mode, the unit will announce
“ mailbox *, you have ** new messages and ** old messages”. DAM will
only play the new messages, starting from the first new message and
continuing until the last new message, then return to standby mode.
4)
When there are only old messages, the LED of mailbox will be solid red.
Press the mailbox button at idle mode, the unit will announce “ mailbox *, you
have ** old messages”. DAM will play from the first message until the last
message.
5)
When there is no message, the LED of mailbox will turn off. Press the
mailbox button at idle mode, the unit will announce “mailbox *, you have no
message”, then return to standby mode.
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com