![background image](http://html.mh-extra.com/html/olympia/ol2410/ol2410_owners-manual_732395051.webp)
OLYMPIA OL2410 Owner's Manual
51
10)
During remote access code setting mode, holding “
Previous
” or “
Next
”
button will scroll through all the selection from 0 and 9, during this process,
no announcement can be heard. Release the “
Previous
” or “
Next
”” button, a
beep will be heard and the last setting will be displayed on the 7-segment LED
with voice prompt.
or
11)
During remote access code setting mode, Press “
Stop
” button to exit menu
setting mode, a beep can be heard and the setting will be validated.
12)
The default remote code is 0000.
9.1.5 Set announce only
1) Press “
Menu
” button during setting the 4th remote access code. A beep is
heard to validate the setting and enter announce only setting.“Ao” will display on
the 7- segment LED, and it will announce “announce only is on or off”. At the
same time, the “On” or “OF” should display for 1 second on the 7-segment.
2)
Press “
Previous
” or “
Next
” button to switch announce only on or off. The
LED will display “On or OF” with the voice prompt “ On or off”.
or
3)
During announce only setting mode, press the “
Menu
” button to confirm the
setting and enter the message alert setting mode.
4)
During announce only setting mode, Press “
Stop
” button to exit menu setting
mode. A beep can be heard to validate the setting.
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com