![background image](http://html.mh-extra.com/html/olympia/nc-350a-2mg/nc-350a-2mg_user-manual_732438007.webp)
Users Guide for NC-350A Currency Counter
6
Function Setting
1. LENGTH DETECTION
(Only available for the model with “3D”)
NOTES:
1. Length Detection (LD) is an optional feature of the NC350A series currency counter. It is
principally used to identify the denomination of the bank notes being counted where the particular
national currency has a significant (+3 mm) difference, in length, between denominations.
2. This system will allow reasonable latitude for bent/missing bill corners, but will not ignore extreme
vertical edge errors, or misalignment.
3. Correct equidistant positioning of the Note Guides will greatly assist the machine to feed the bank
notes.
By pressing the 3-D key, the machine will enter into the Length Detection Setting. The display will
show:
The selectable range of the Length Detection Accuracy is 3mm, 5mm, 7mm, 9mm and off. You can
select the Length Detection Accuracy simply by pressing the corresponding numeric keys. Turn off
this function by pressing the key “0”. After selecting the desired leve l, press the START key to save
the setting and exit from the setting mode.
2. WIDTH DETECTION
(Only available for the model with “3D”)
NOTES:
The Width Detection (WD) is measuring the smaller dimension of the bank note. It then compares this
information with preceding bills in the present count run, in order to largely eliminate the possibility of
smaller denominations being included in the count, in error. This usually happens when small notes
are ‘hidden’ within a bundle of larger ones (Although the WD fe ature will also cause the machine to
STOP if the bill is larger).
1. When opting to use this feature, from the H - - 0 (OFF) position, there are many available settings
to choose from:- H - - 3, H - - 5, H - - 7 and H - - 9. These numbers indicate the millimetre (mm)
difference, in the narrow dimension size, between the denominations of your bank notes. It is
important to know that you should measure the difference beforehand, and set the machine to
detect to the nearest of your differential. Your local Distributor will readily provide guidance on
domestic currency settings.
By pressing the 3-D key two times, the machine will enter into the Width Detection Setting. The