Users Guide for NC-350A Currency Counter
13
Additionally, please maintain the machine using this relatively simple monthly routine:
1. Turn the Main Power Switch OFF and disconnect the Mains Power Cord from the rear of the
machine.
2. Using a piece of clean, lint-free cloth and an approved non-toxic solvent fluid, carefully clean
the surfaces of the following parts, which are identified in the two photographs below. Do not
allow any fluid to come in contact with ANY electrical parts.
Transfer Rollers, Friction Rollers, Feed Rollers, Drum Rollers, Stacker Sensor, Central Hopper
Sensor and the Outer Plastic Covers.
Transfer Rollers - Locations Component Locations
Transfer sensor
