Users Guide for NC-350A Currency Counter
7
display will show:
The selectable range of the Width Detection Accuracy is 3mm, 5mm, 7mm, 9mm and off. You can
select the Width Detection Accuracy simply by pressing the corresponding numeric keys. Turn off this
function by pressing the key “0”. After selecting the desired level, press the START key to save the
setting and exit from the setting mode.
When both the Length Detection Function and the Width Detection Function are turned off, the red
LED indicator on the 3-D key will be off.
3. UV COUNTERFEIT DETECTION SETTING
(Only available for the model with “UV”)
NOTES:
1. The vast majority of the world's bank notes are printed on a quality of paper designed to
withstand frequent handling and extend the time in circulation. This specification normally means
that they are printed on a high quality, linen-based paper, which has low fluorescence
characteristics. Because the majority of counterfeit bank notes are printed on poorer quality
papers, which have been bleached and therefore fluoresce, UV detection is normally the most
useful method of helping to find forged bills at the speed at which a currency counter operates.
2. As the machine has stopped, because of the possibility of a counterfeit being present, you should
then remove the last (top) note to have arrived in the Stacker area in order to make a decision on
the validity of the bill by closer visual examination.
3. Most users will find the default position of U - - 2 (Standard) to be correct for their requirements.
Some experimentation using a lower, or higher setting may, in exceptional circumstances, be
necessary. Your local Distributor will be able to provide guidance, if required.
By pressing the CFA key, the machine will enter into the UVD system feature. The display will show: