Olympia MILLENNIUM H, Owner'S Manual

Page: 80 / 113

The Ultimate Ice Resurfacer 68
MILLENNIUM
H
7 WORKING WITH THE OLYMPIA MILLENNIUM H
7.1 Driving
7.1.1 Starting
Make sure the gear selector is in the P (park) position. Insert the ignition key and turn to the
start position. Once the engine is running release the key and it will automatically return to the
run position.
Check the engine gauges starting with the oil pressure gauge. If the oil pressure does not start
to increase immediately shut down the engine by turning the ignition key to the off position
and report the problem to management to arrange for servicing.
7.1.2 To move the ice resurfacer
To move the OLYMPIA Millennium H first adjust the engine rpm knob on the top right corner
of the dash until the rpm gauge reads between 1500 to 1700 rpm. To move the OLYMPIA
Millennium H push the gear selector into the (F)forward position or (R) reverse position and
depress the accelerator pedal. The more you depress the accelerator pedal the faster the
OLYMPIA Millennium H will move. To stop ease off the accelerator pedal. The hydraulic oil will
stop flowing to the wheel motors and the machine will stop.
NOTE: When not driving on the ice surface it is advisable to set the rpm level at
approximately 11-1200 rpm for the optimum control in maneuvering in tight spaces.