Olympia MILLENNIUM H, Owner'S Manual

Page: 113 / 113

The Ultimate Ice Resurfacer
MILLENNIUM
H
□
Inspect the engine temperature gauge for proper function.
□
Inspect the voltmeter for proper function.
□
Test the horn.
□
Turn on the headlights and check for the reflection of both the headlights and tail lights.
□
Lower and raise the conditioner.
□
Turn on your elevators for at least one full cycle of the automatic snow breaker system.
□
Lower the snow bin Cycle the snow breaker using the snow breaker bypass button to ensure proper operation.
□
Operate the LPG cross over and run the OLYMPIA off each tank for a few minutes to ensure proper operation.
□
When operating the LPG crossover make sure to turn it slowly as to not trip the excess flow valve.
□
Dial back the RPM Controller until the OLYMPIA is at an idle and turn the OLYMPIA off.
□
Fill the flood making water with hot water. Never leave the hose unsupervised while filling and beware of the danger
that the hot water can cause.
□
Fill the wash water tank with COLD water only. Never leave the hose unsupervised while filling.
□
Test both the wash water and flood water to make sure both systems have unrestricted flow.
□
Using your log book, log any concerns of the circle-check. Make sure to log in the date and your name.
You have now completed the circle-check and are ready to proceed onto the ice surface and begin the resurfacing process.
Make sure to always use the horn when crossing any pedestrian areas.