background image

Olympia Business Systems Vertriebs GmbH

Zum Kraftwerk 1
45527  Hattingen
GERMANY

Information Status

09/2014

12

R

6. Place the tools in the spare part and tool

compartment (14) and tighten the screw
securing the spare part and tool compart­
ment (15).

Note

: Before changing a blade, the blade ad­

justment screws (12) must be screwed back to
their original position. The blade adjustment
screws (12) must be unscrewed (anticlock­
wise) sufficiently far that the threads of the
blade adjustment screws (12) are no longer
visible beyond the fastening rail (17).

 

Technical Data

Material for cut­
ting

Paper, cardboard

Cutting capacity

50 sheets (80 g / m²)

Max. thickness

5 mm

Cutting length

360 mm

Minimum cut

35 mm

Dimensions

503 x 508 x 459 mm

Base area

280 x 360 mm

Weight

6.6 kg

Automatic fixation of the material when cutting.

 

Cleaning the Device

Attention

: Risk of injury! The guillotine

blade is very sharp! Take the utmost

caution when cleaning the guillotine blade.

Clean the outer surfaces of the device with a
clean, lint-free cloth. Clean the blade carefully
with a clean, soft brush.

Do not use any aggressive cleaning agents or
chemicals to clean the device.

 

Information on Disposal

In order to dispose of your device, take it
to a collection point provided by your
local public waste authorities (e.g. recy­

cling centre). According to laws on the dispos­
al of electronic and electrical devices, owners
are obliged to dispose of old electronic and
electrical devices in a separate waste contain­
er. The symbol indicates that the device must
not be disposed of in normal domestic waste.

Risks to health and the environment
from batteries! Never open, damage or
swallow batteries or allow them to pol­

lute the environment. They may contain toxic,
ecologically hazardous heavy metals. You are
obliged by law to dispose of batteries and pow­
er packs at a shops which sell batteries or at a
collection point provided by the local public
waste authorities. Disposal is free of charge.
The symbol indicates that the batteries must
not be disposed of in normal domestic waste
and that they must be brought to collection
points provided by local public waste authori­
ties.

Packaging materials must be disposed
of according to local regulations.

 

Guarantee

Dear Customer,

we are pleased that you have chosen this
equipment.

In the case of a defect, please return the de­
vice together with the receipt and original
packing material to the point-of-sale.

Summary of Contents for G 3650















Reviews: