10
R
Laser Positioning
The laser positioning feature provided helps
you to ensure the material to be cut is posi
tioned accurately. The laser indicates the ex
act cutting edge by means of a red line. You
can look through the viewing window (7) to see
the position at which the material will be cut.
1. Press the switch (10). The laser is
switched on.
2. Press the switch (10) again. The laser is
switched off.
Note
: To ensure a longer battery life, switch
the laser positioning feature off when the de
vice is not in use.
Paper Guide
1. Release the lock (2) for the paper
guide (3).
Note
: Do not attempt to slide the paper
guide (3) if the lock (2) has not been released.
2. Position the paper guide (3) with the aid of
the positioning lines and measuring sys
tems (5).
Note
: The paper guide (3) can be adjusted
continually in the rail.
3. Lock the paper guide (3). The paper guide
(3) now serves as a stopper for the materi
al to be cut.
12
13
14
15
16
17
18
19
20
12. Blade adjustment screws
13. Safety guard
14. Spare part and tool compartment
15. Screw for spare part and tool compartment
16. Blade
17. Fastening rail
18. Screws for fastening rail
19. Blade guard
20. Screws for blade guard
