Page 6
Operating Instructions
Olympia CM 1846S-F
CM 1846S-F with Barber-Bakery firmware
Operator system ( Babersystem ECR type 0 standard)
Changing operator
The operator applies over an operator button , before doing a transaction this system can in the PRG -- mode be
influenced i.e., it can be turned off.
During a booking the operators can be changed.
The operator 1 applies and starts with his bookings.
During the booking a new operator can be registered over the operator button . The operator change is documented by a
line of text on the voucher.
All bookings are assigned to the operator registered respectively automatically.
Operator system ( Bakerysystem ECR type 1 )
ATTENTION:
The operator system bakery must be activated at CLERK-SEKTION #6 Status S4
( programming Instruction Page 25)
select the point „Acces for all Track is enable-Supervisor“
Floting operater function
Before doing a transaction the operator applies over an operator button (or key).
This system can in the PRG -- mode be influenced i.e., it can be turned off.
Several operators can be registered at the same time.
The operator: 1 applies and starts with his bookings.
The operator can interrupt his booking any time, without which the register is closed.
The operator: 2 can apply over the operator button (or key) now, execute his bookings and lock [CASH] or also interrupt
his booking.
The operator:1 applies on, again over the operator button (or key) his balance is shown automatically and he can
continue his booking.
Attention
As long as an operator is registered the lock position of „R“ cannot be changed . Cancel operators first push the
button through [TRACK = SALDO] . (lay out button)
1.7 Manager system
The system enables the assignment of two manager PASSWORDS. This results in access being restricted for:
1. The functions with the key in position "Z“ (reports with subsequent deletion)
2. The functions with the key in position "S/PRG" (programming)
A password is composed of four characters and the log in process is analogue to that described above. In addition, PRG
Mode can be used to restrict the following clerk rights:
Restriction of transactions in X mode, Restriction of transactions in Z mode ,Restriction of "P/O" transactions
Restriction of "RETURN" transactions,Restriction of "VOID" transactions, Restriction of "NO SALE" transactions
