![background image](http://html2.mh-extra.com/html/olympia/bs-468-a/bs-468-a_user-manual_3899931031.webp)
31
921468007_09_010
BS-464 GSM telephone dialer programming
Entrance in GSM menu is allowed only if the system has registered a GSM telephone dialer
(«SYS-
TEM
»
«SCAN EXTENSIONS»).
If entrance is not allowed, the screen to the left appears.
In case entrance is allowed, the screen to the right appears.
«GSM»
«CALLING NUMBERS». This option permits us to store a
telephone number into the panel's memory and give that number the properties as required.
We can store up to 6 telephone numbers that can be mobile
or land line numbers, local or international. Using this menu
we can select the number of the telephone that we want to al-
ter. Select from 1 to 6.
After selecting the number of the phone that we want to alter, the fol-
lowing screen is shown:
At this point we can select if during the selected events the GSM will call and send an SMS to the tel-
ephone number, will only call, or will only send an SMS. It is advised to use SMS notification and not
phone calling, since charging can be verified easily (a phone call can be transferred to an automatic
telephone dialler instead of the phone).
After selecting one of the above options the following screen is shown:
This selection is valid only if we have enabled remote access in the
initial GSM menu. Through Remote access we decide if the current
number can send remote commands to the panel or not.
NO GSM CONNECTED
PRESS ‘#’ TO RETURN
____ GSM_______
CALLING NUMBERS
INCOM. CALL REACTION
ENTER SIM CARD PIN
REMOTE ACCESS ENABLE
PHONE SERIAL NUMBER
CHOOSE FROM 1 TO 6
-
______SMS CALL _____
CALL AND SMS
CALL ONLY
SMS ONLY
REMOTE ACCESS ENABLE
NO
YES