background image

 

12

Press 

 or 

 key to search the required number in 

the redial memory list. 

z

 Press   key to carry out the conversation. 

z

 Press   key to end the call. 

Note:

 1. If the number is longer than 12 digits, only the last 12 

digits will be shown. 
2. Name is displayed instead if number is matched with phone 
book memory. 
 
 

Dialing from the Phone Book 

z

 Press    key; the first entry in the phone book appears. 

(Or “MEM EMPTY” if no entry) 

z

 Press   or 

 key to select the required subscriber 

from the phone book. Alternatively, enter the first letter of 
the name required. 

z

 Press   key. The number is dialed.   

Note: How to store entries in the phone book is explained in the 
Chapter “Phone Book”. 

Call Log Operations 

IMPORTANT:

 To use the “Call Log” function, you must 

subscribe to your network operator’s Caller Line Identification 
(CLI) service. 

Browse, Call Back, Delete, Store 

If calls have been received in your absence, these are stored in 
the CALL LOG memory when your telephone service has 
enabled this function. The number of calls appears in the 
display. 

z

 Press   key as often as necessary until CALL LOG 

menu appears. Then press “OK/INT” key. Alternatively, 

press and hold “

*

” key 2 seconds.   

 

13

z

 Browse: 

Press   or 

 key  to  browse  through  the 

CALL LOG memory. 

Or 

z

 Call 

Back: 

press   key to call back. 

Or 

z

 

Delete: Press and hold “C” key two seconds to delete one 
or all the entries. Selection is made by pressing 

 or 

 key. 

Or 

z

 Store: 

Press    key, then press “OK/INT” key to start the 

NAME entry by keypad. Press “OK/INT” key to confirm. 
Select the ring tone with 

 or 

 key. Press “OK/INT” 

key when finish. 

Note: 1. The CALL LOG icon and display indicator disappear 
only after browsing through all the entries. 
2. It is only possible to enter subscribers in the phone book who 
has not stored before. 

Edit Call Log memory   

When browsing Call Log memory, Caller Line Identification (CLI) 
number can be edited before dial back. Amended CLI number 
will not overwrite the stored Call Log memory.     

z

 

Press “OK/INT” key to enter edit mode. 

z

 

Press “0-9” to add digits behind of CLI number. 

z

 

Press “C” key to remove digits. 

Muting the Microphone 

z

 Press    key can switch the microphone on or off during 

a call. 

Holding Calls / Forwarding Calls 

If the telephone is connected to a PABX system, it is possible to 
put calls on hold and call other extension lines or to forward 
calls. 

z

 

Press “R” key to put the call on hold and dial the extension 

Summary of Contents for 6101















Reviews: