16
when finished.
z
Enter name (max. 10 characters) and press “OK/INT” key
when finished.
z
Select the ringing tone with
or
key and press
“OK/INT” key when finished.
z
If a VIP ring is assigned for that entry, a digit ‘#’ will be
shown in front of the name during the incoming call or
browsing
z
“MEM FULL” appear stand for memory full.
Or Store the number from the Pre - dialing mode
z
To store a phone number from the pre-dialing mode (when
a phone number is entered during standby mode before
pressing the key) to the phonebook, first press
key, follow by pressing “OK/INT” key. Then, the user will
be prompted to enter the name. The Entry procedure will
be same as above.
Edit Entries
z
Press key until the PHONE BOOK menu appears and
press “OK/INT” key.
z
Press or
key to select EDIT ENTRY and press
“OK/INT” key.
z
Press or
key to select the desired entry and
press “OK/INT” key.
Note:
If the phone book is empty, ‘EMPTY’ will display.
z
Edit the number (delete any incorrect digit by pressing “C”
key) and press “OK/INT” key.
z
Edit the name (delete any incorrect character by pressing
“C” key) and press “OK/INT” key.
z
Press or
key to select the ringing tone and press
“OK/INT” key.
Delete Entries
z
Press key until the PHONE BOOK menu appears and
press “OK/INT” key.
17
z
Press or
key to select DELETE and press
“OK/INT” key.
z
Press or
key to select the desired phone book
entry. Alternatively, enter the first letter of the name
required.
z
Press “OK/INT” key to delete the entry.
To delete all the phone book entries, select the submenu
DELETE ALL instead of DELETE.
Handset Settings
Changing the Ringing Volume
z
Press key until the HANDSET menu appears and
press “OK/INT” key three times.
z
Press or
key to select the required volume (from
0 to 5 levels) and press “OK/INT” key.
Note:
The ringer volume can be heard at different volumes. If
the ringer symbol appears as non dotted line, the ringer volume
will be switched to off.
Changing the Ringer Melody (external
/ internal)
z
Press key until the HANDSET menu appears and
press “OK/INT” key twice.
z
Use or
key to select the required submenu (EXT
RINGER or INT RINGER) and press “OK/INT” key.
z
Use or
to select the required melody (1-10).
Press “OK/INT” key to confirm.
Entering/Changing Handset Name
It is possible to assign a name (max. 10 characters) to each
handset. This name is then displayed when the phone is in
standby mode.
z
Press key until the
HANDSET
menu
