Page
3
from
4
INSTALLATION INSTRUCTIONS
1 Pass through the central hole of the plastic base the luminaire’s cables and connect them to the
included terminal block (figure
1)
.
Ν
for neutral
,
L for live wire
.
2
Use the included mounting accessories to install the plastic base (
install the notch, facing the
required direction of the luminaire
) and follow the mounting methods on the wall or ceiling.
o
3 Install the luminaire to the plastic base by turning it clockwise by
90
and then power it, with the
mains power supply
.
220-240V AC/50-60Hz
Blue-grey
Brown
L
N
Ν -
Blue-grey
L - Brown
Figure
2
:
Connecting to the mains power supply
Connecting to the mains power supply
Connecting the terminal block
Male terminal block
Female terminal block
Base
Luminaire
Figure
1
Side view
on ceiling attached
Front view
on ceiling attached
Front view
wall mounted
Downside view
wall mounted
Power supply Cable
Mounting methods
923393000_09_008
Plastic base
Diffusor
Diffusor
Reflector
1
2
3
NOTE!! After finishing the installation you must power the luminaire at least for 24 hours for
battery charging to perform the nominal autonomy.
