![background image](http://html.mh-extra.com/html/hitachi/ub-18dsl/ub-18dsl_instruction-manual_142401001.webp)
1
2
3
English
CORDLESS LANTERN UB18DSL INSTRUCTION MANUAL
Lamp cap
323-519
Fluorescent lamp
323-339
Lamp cover
323-340
LED
Knob
Handle
Latch
Battery
Latch
Battery
Lamp cover
1
2
3
Re
fl
ector
326-194
4
UB
18DSL
Please read the following instructions throughly before using this lantern and use it correctly.
CAUTION:
●
Do not touch the
fl
uorescent tube while lit or right after
using. Touching it might cause burns.
●
When hung from a high position always secure it
with string or similar item so it won’t fall. If it falls,
injuries might result.
●
Always turn the switch o
ff
(OFF) when not using or when
replacing the
fl
uorescent lamp.
●
Do not use in the rain.
●
Do not disassemble, strike or otherwise apply impacts to
the lantern body.
●
Do not let gasoline or thinner get on the lantern body.
●
Do not leave the lantern in places that reach high
temperatures (60°C or higher) such as in vehicles under a
blazing hot sun.
Doing so might cause the lantern to break down.
●
Do not use any other than the speci
fi
ed storage batteries.
NOTE:
Do not leave the switch in the ON position while not in use. This will shorten the life (charge/discharge times) of the battery.
SPECIFICATIONS
Battery
BSL1430 (sold separately)
Fluorescent lamp
Compact FL9W (Code No.323339 for replacement
fl
uorescent lamps.)
Operating time
Fluorescent light: Approx. 3.5 hours LED: Approx. 150 hours (Using full charged 3.0Ah Battery)
Dimensions
height 305mm × width 95mm × depth 96mm (without battery)
Weight
0.5kg (without battery)
HOW TO USE
1. Inserting or removing the battery (See
Fig. 2
)
To install, make it face the same as battery and insert
inwards in the direction in the
fi
gure.
To remove, extract it towards the direction while holding
down the latch of battery.
2. Replacing the
fl
uorescent lamp (See
Fig. 3
)
Turn the lamp cover in the direction and remove
it. Remove the re
fl
ector and lamp cap and replace
the
fl
uorescent lamp.
After replacing with the new lamp, install the re
fl
ector and
lamp cap and reinstall the lamp cover in the direction .
AUTOMATIC SWITCHING FUNCTION
The lamp automatically switches to the LED to prevent total loss
of light when the battery wears down.
* When the BSL1430 battery is used, LED may not be turned
on due to the battery’s over discharge protection.
NOTE
: Only parts
1
,
2
,
3
and
4
will need replacement.
Important notice on the batteries for the Hitachi cordless
power tools
Please always use one of our designated genuine batteries. We
cannot guarantee the safety and performance of our cordless
power tool when used with batteries other than these designated
by us, or when the battery is disassembled and modi
fi
ed (such
as disassembly and replacement of cells or other internal parts).
UB18DSL̲Eng.Kor.indd 1
UB18DSL̲Eng.Kor.indd 1
2011/07/30 10:04:49
2011/07/30 10:04:49