Date
22/4/2021
Document number
921100400_09_005
Page
65 of 71
65 / 71
Now proceed with configuring other parameters, such as detector
alarm
limits
and
names
. Click on a
loop entry on the left column. All registered points in this loop, appear on the right section of the screen.
When an entry is selected, its data is displayed on a form below:
Double click on a point to edit name and parameters.
In the name textbox you can edit the name of each device.
Edit all other parameters according to the installation
needs. The last opti
on, “
Connected Device
” has no effect
on the control panel and is only used on the software for
loop and battery calculation tools.
When finished, click on “
Save
” button to save all
configurations for this point.
You can also edit values on multiple points by selecting multiple entries (using Ctrl on PC keyboard). Right
click and select which parameter you need to edit in multiple points.
Similarly
to points’ configuration, you can edit other segments of the control panel (conventional sirens,
panel relays, extra relays, tasks and zones) by selecting a group entry on the left column.
