Page. 3 from 4
10 - 30V DC
from fire or alarm
panel
Connect to F_OUT
of fire panel
Connect to TEL.OPER (A and - or B and -)
or NC contact of alarm panel
Telephone LINE
Power network earth wire
To telephone sets
Figure 2
then the device dials the numbers
normally.
The full structure and the menu
operations are:
Entering phone numbers
.
In this menu we can save up to 10
different numbers with 20 digits each.
With we select
. Then we priority
of the number from to , with
maximum priority being
.
We select the number with and we
save our selection with .
After the priority selection, we can
enter its digits one by one. We select
the number with and with
we save our selection. After entering
the last digit we select symbol and
press to save the phone number.
Then the number is saved and the
device returns in the priority selection
menu, at priority .
There also are some special symbols
as which stands for pause 0.8
seconds,
t h a t
s t a n d s
f o r
asterisk (*) and that stands for sharp
(#).
If we want to delete an existing
phone number, we select its priority
and we replace the first digit with and
press .
Displaying saved phone numbers.
We can check which number is saved
in each memory position. We select
from the menu and press . With
keys we select the number
’
s
priority and we accept with . Then
the display starts displaying one-by-
one all the digits of the number. If
memory position is blank the display
shows . Then the device returns in
the priority selection menu, at position
.
Dialling check
In this menu we can dial any of the
numbers, in order to check the normal
connection of the device. To do this we
select and press . With keys
we select the number we want, and
press
to accept. The device dials
the phone number and transmits the
recorded messages once.
Recording and listening messages.
We can Record up to two different
messages. We select and press .
With
keys
and we can select
to listen message A, or to listen
0
9
-
u
A
B
-
C
-
2
P
C
8
F
P
0
0
8
1
E
921489000_09_005
0
