System Ready
olympia electronics
1 FAULT
AT PANEL 1
1 DISCONNECTED B
AT PANEL 1
6.3 User instructions.
In quiescent state the panel shows :
If the panel detects an error (e.g. Disconnection of the battery) the Display shows :
Simultaneously the internal buzzer sounds, the LED BATTERY lights and the FAULT relay
is activated. To deactivate the buzzer press the ‘ON-OFF BUZZER’ key. More information
concerning the problem can be obtained by pressing the ‘FAULT EVENTS’ key. In this
case the Display shows:
If more than 1 errors occure then the Display shows the last error and the LIST LED lights
to indicate multiple errors. For more information press the ‘FAULT EVENTS’ key. After
correcting all errors we must RESET the system. Press the ‘ENTER’ key, enter the 4 digit
code, select‘SYSTEM RESET’ from the menu and press ‘ENTER’. The Display shows:
GENERAL SYSTEM
RESET
And after 15 sec the system enters normal operation mode.
If an alarm occurs on a zone (e.g. zone 8) the Display shows:
1 ALARM
ÆONE 8
Simultaneously the internal buzzer sounds, the ALARM LED is activated and the ALARM
relay is energized.
Ôo silence the buzzer
and the sirens
press the ‘ON-OFF BUZZER’.
To silence ï
nly
the sirens
press the ‘’ENTER’’ key and enter the user code.
|In order to RESET the system when the sirens are silenced press the ‘’ENTER’’ key, enter
the user code and select the appropriate option from the user menu.
Date
File
Code
Page
09-
E
1116000.09-
E
10 from 20
SELECT->ENTER
SYSTEM RESET
GENERAL SYSTEM
RESET 15
SELECT->ENTER
EVACUATE
SELECT->ENTER
SIREN SILENCE
ALARM->SILENCED
ZONE ×
SELECT->ENTER
DISABLE ZONES *
DISABLE
ZONES OF PANEL 1
ENABLE
ZONES OF PANEL 1
DISABLE
ZONE 07
ENABLE
ZONE 07
xxxxxxxxxxxxxxxx
1234567890123456
1234567890123456
x -
1234567890123456
1234567890123456
SELECT->ENTER
ENABLE ZONES *
<0000>
ENTER
ESC
ESC
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
The detectors are reset, the LEDs are
tuned off, the sirens are silenced and
the relays are deactivated. After 15sec.
The panel enters normal operation.
A manual alarm is issued. The sirens are
sounded and the ALARM relays
are activated.
The sirens are deactivated. This setting
is only available only if an alarm condition
has occurred.
GENERAL SYSTEM
RESET
GENERAL SYSTEM
RESET 15
GENERAL SYSTEM
RESET
GENERAL SYSTEM
RESET 15
Date
File
Code
Page
09-
E
1116000.09-
E
9 from 20
22
December
2004
22
December
2004
1 ALARM
EVAC. FROM KEYB.
